Hood · Parts
Wolf Baffle Filter
Its job
- Forces rising exhaust to zigzag between angled stainless channels, so grease strikes the metal and stays there while the air carries on.
- Lets the grease it catches run down to its lower edge, where some Wolf hoods carry small grease cups.
- Guards the blower and the inside of the hood, which is why Wolf says never to run the hood with its filters out.
Signs it is going
- Clogs with grease until air struggles through, and the hood turns loud and weak on every setting.
- Gets bent or dropped, then sits crooked in its slot and leaves a gap for grease to slip past.
- Goes back in the wrong order and will not seat; on older hoods the outer filters have to be eased aside to let the middle one in.
- Leaves full grease cups to overflow, and drips along the front edge can be taken for a leak.
Our order of work
- Take out the filters and grease cups whenever the hood is open for another job, and check the slots they sit in.
- Straighten a filter that will not seat, or order a genuine replacement matched to the hood's rating plate.
- Clear grease that has already got past the filters off the blower wheel and housing, where Wolf says it must not build up.
How often
Wolf’s how-to page says roughly monthly, and more often in a kitchen that fries or cooks with a wok; its latest pro hood guide stretches that to three to six months. The detail sits under how often to clean Wolf baffle filters.
Downdrafts use mesh, not baffles
A Wolf downdraft carries aluminium mesh filters behind stainless covers instead. Both go in the dishwasher, and a FILTER light on the control module says when they are due.
When washing changes nothing
If a freshly washed set leaves the hood just as loud on high, the restriction sits further along: the damper, the duct or the blower itself.
Two-Minute Check
Run it in order. Nothing here needs a panel off, a ladder or a wire touched.
- Turn the blower and lights off, let the underside cool, and wear gloves — the filter edges can cut.
- Lift each filter up along its angle and let the bottom swing down; on older hoods the middle one has to come out before the rest.
- Wipe the worst of the grease off with paper towel, empty any grease cups, then put filters and cups through the dishwasher.
- Once everything is dry, refit the grease cups before the filters, and switch on only when every filter sits flush.
- Stop here — call Wolf Repair Woodinville, (425) 585-2373. Call (425) 585-2373